SUMO เครื่องเชื่อม TIG 250 AC/DC MCU
หมวดหมู่สินค้า: SUMO
รหัส :
สนใจติดต่อสอบถามเพิ่มเติม
เพิ่มเพื่อน

27 เมษายน 2564

ผู้ชม 672 ผู้ชม

เครื่องเชื่อม TIG 200A SUMO SMART

เครื่องเชื่อมนิ่ม ด้วยระบบ

DIGITAL INVERTER IGBT

เชื่อมแรงกระแสเต็ม 200 แอมป์


 

รายละเอียด

เครื่องเชื่อม TIG 200A SUMO SMART

Welding Machine TIG 200A SUMO SMART

PROMOTION !! แถมฟรี

ซื้อ 1เครื่องแถมเกจ์ Argon SUMO (1ตัว)

ข้อมูลทางเทคนิค Technical data

Power Voltage

AC220V±15% V

Frequency

50/60 HZ

Rated Input Current

28 A

No-load Voltage

56 V

Output Current

8-200 A

Rated Input Voltage

18 A

Force Range

 

Duty Cycle

60%

No-Load Loss

40 W

ARC Start High

HF

Efficienc

80

Power Factor

0.73

Insulation Grade

F

Housing Protection Grade

IP21

Weight Thickness      Stainless Steel
                                    Steel

0.4-6.0 mm
0.5-6.0 mm

Weight

6.55 kg

Dimension

410x155x295 mm

อุปกรณ์มาตรฐาน (Standard Accessories)


        

 

 

ชุดเชื่อมทิก WP-26 ยาว 7.5 เมตร

 

 
 

ชุดสายดิน 300A ยาว เมตรยาว 2 เมตร ขนาดสาย 16 mm ข้อต่อไทย 25P


 
สายถักพีวีซี ยาว 2 เมตร ขนาด Ø8 mm

 

 

หน้าจอแสดงผล/Panel

 

ข้อต่อหน้าตู้เชื่อม/ Front Connector

 

ข้อต่อหลังตู้เชื่อม/Back connector

 

การใช้งานเชื่อมTIG 

    1. ใส่ทังสเตนที่ด้ามเชื่อมทิกและเชื่อมต่อสายที่หน้าตู้เชื่อม และต่อสายแก๊สอาร์กอนให้เรียบร้อย

    2. เสียบปลั๊กเข้ากับเต้ารับไฟบ้าน 220V/50Hz จากนั้นกดสวิทช์เปิดเครื่องที่อยู่ด้านหลังเครื่องเชื่อม พัดลมเครื่องเชื่อมจะเริ่มหมุน และหน้าจอแสดงผลมีไฟติดพร้อมทำงาน

    3. ปรับกระแสไฟเชื่อมตามต้องการและเปิดแก๊สอาร์กอนที่ถังแก๊สโดยปรับแก๊สให้เหมาะสม

    4. จับด้ามเชื่อมจดลงไปที่ชิ้นโดยให้ทังสแตนห่างจากชิ้นงานประมาณ 2-4 มิล  กดสวิทช์ที่ด้ามเชื่อมเพื่อให้เกิดการอาร์คและเริ่มต้นการเชื่อม

 

คำแนะนำ

 

    ก่อนทำการเชื่อมให้กดสวิทช์ค้างไว้ประมาณ 2-3 วินาทีเพื่อเป็นการไล่แก๊สในปืนเชื่อมให้พร้อมใช้งานเพื่อป้องกันรอยดำในการเชื่อมเพราะแก๊สจะเป็นตัวคลุมชิ้นงานให้การเชื่อมสมบูรณ์และได้แผลเชื่อมที่ดีที่สุด หลังหยุดการเชื่อมให้ถือด้ามเชื่อมไว้ในท่าเชื่อมประมาณ 3-5 วินาที เพื่อให้แก๊สคลุมชิ้นงานป้องกันรอยไหม้ดำในการเชื่อม  ห้ามยกด้ามทันทีหลังการเชื่อม

การดูแลรักษา

    1. ทำความสะอาดเครื่องโดยการใช้เครื่องเป่าลมเป่าฝุ่นออกจากเครื่องและใช้ผ้าแห้งเช็ดทำความสะอาดเมื่อรู้สึกว่าสกปรก ในกรณีที่เครื่องถูกใช้งานในพื้นสปรก มีฝุ่นควันเยอะ ให้เป่าทำความสะอาดด้วยเครื่องเปล่าลมและเช็ดทำความสะอาดด้วยผ้าแห้งทุกๆ 1 เดือน

    2. การใช้เครื่องเป่าลมเป่าทำความสะอาดควรปรับความแรงลมให้เหมาะเพื่อป้องกันไม่ให้ชิ้นส่วนบนเครื่องเชื่อมเสียหาย

    3. ให้ตรวจสอบระบบวงจรของเครื่องอย่างสม่ำเสมอ ตรวจสอบจุดเชื่อมต่อสายต่างๆว่ายังเชื่อมต่อกันดีและแน่นหรือไม่ ตรวจสอบสายไฟและปลั๊กไฟ ข้อต่อหน้าตู้เชื่อม หากพบสะเก็ด และ สนิม ให้รีบทำความสะอาดให้เรียบร้อยและเชื่อมต่อให้ถูกต้องก่อนการใช้งานครั้งต่อไป

    4. หลีกเลี่ยงและป้องกันไม่ให้น้ำและไอน้ำเข้าไปในเครื่องเชื่อม ถ้าหากพบว่ามีน้ำหรือไอน้ำเข้าไปในเครื่องเชื่อมให้ใช้เครื่องเป่าลมเป่าทำความสะอาดให้แห้งและเช็คฉนวนป้องกันของเครื่องว่ายังปกติหรือไม่

 

    5. กรณีต้องการเก็บรักษาไว้เป็นเวลานานหลังการใช้ให้ทำความสะอาดให้เรียบร้อยและแพ็คใส่กล่องเก็บไว้ในที่แห้งและสะอาด 

 

Using TIG function

    1. Assemble tungsten on the TIG torch, connect the torch to the machine and connect the Argon gas to the machine.

    2. Plug in the machine to home electric 220V/50Hz, then pushing the power switch on the back of machine to “ON” direction, then power light and display are on and the cooled fan works.

    3. Adjust the current, turn on the argon gas at the gas cylinder and adjust to gas flow to be proper with the type of welding.

    4. Put the torch to the workpiece and keep the tungsten electrode 2-4mm from the workpiece, press switch on the torch to start arc and weld.

 

Suggestion: 

 

    Before welding please hold the torch switch for a few seconds until all the air is clear out when you use the welder first time, and please noted that gas flow is the protection function to make sure the good welding result, so please hold the torch at the welding position for a few minutes after you finish your work.

 

MAINTENANCE

    1.Remove dust by dry and clean compressed air regularly, if welding machine is operating in environment where is polluted with smokes and pollution air, the machine need remove dust every month.

    2.Pressure of compressed air must be within the reasonable range in order to prevent damaging to small components of inner-machine.

    3.Check internal circuit of welding machine regularly and make sure the circuit connections are connected correctly and tightly (especially plug-in connector and components). If scale and rust are found, please clean it, and connect again tightly.

    4.Prevent water and steam from entering into the machine. If that happens, please blow it dry and check insulation of machine.

 

    5.If welding machine will not be used for long time, it must be put into the packing box and stored in dry and clean environment

 
 
Engine by shopup.com